Department of Mechanical and Information Engineering

Filter
Conference contribution

Search results

  • 2023

    Hydrogen Charging Characteristics to Vehicle Tanks

    Karng, S. W., Kim, B. H. & Rhee, G. H., 2023, 10th International Symposium on Turbulence, Heat and Mass Transfer, THMT 2023. Begell House Inc., (Proceedings of the International Symposium on Turbulence, Heat and Mass Transfer).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2022

    RPC-Based OPC-UA Agent for Legacy PLCs

    Lee, S. Y. & Sung, M., 2022, 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA 2022. Institute of Electrical and Electronics Engineers Inc., (IEEE International Conference on Emerging Technologies and Factory Automation, ETFA; vol. 2022-September).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Standard Cell Design Optimization with Advanced MOL Technology in 3nm GAA Process

    Yang, G., Jung, H., Lim, J., Seo, J., Kim, I., Yu, J., You, H., Kong, J., Kim, G., Jeong, M., Park, C., An, S., Rim, W., Kim, H., Lee, D., Baek, S., Jung, J., Song, T. & Kye, J., 2022, 2022 IEEE Symposium on VLSI Technology and Circuits, VLSI Technology and Circuits 2022. Institute of Electrical and Electronics Engineers Inc., p. 363-364 2 p. (Digest of Technical Papers - Symposium on VLSI Technology; vol. 2022-June).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • Thermal management device with boiling-driven heat spreader

    Lim, H., Shin, D. H., Rhee, G. H., You, S. M. & Lee, J., 2022, 38th Annual Semiconductor Thermal Measurement, Modeling and Management Symposium, SEMI-THERM 2022 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 45-47 3 p. (38th Annual Semiconductor Thermal Measurement, Modeling and Management Symposium, SEMI-THERM 2022 - Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2019

    An experimental study on the evaporation heat transfer and pressure drop of R-1234ze(E) in a shell and plate heat exchanger

    Jo, C. U., Lee, D. C., Kim, D. & Kim, Y., 2019, ICR 2019 - 25th IIR International Congress of Refrigeration. Minea, V. (ed.). International Institute of Refrigeration, p. 474-479 6 p. 65. (Refrigeration Science and Technology; vol. 2019-August).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Annoyance modeling of construction noise using acoustical features, noise sensitivity and health condition

    Lee, J. K., Chang, S. I., Lee, S. I. & Jang, J. W., 2019, Proceedings of the 23rd International Congress on Acoustics: Integrating 4th EAA Euroregio 2019. Ochmann, M., Michael, V. & Fels, J. (eds.). International Commission for Acoustics (ICA), p. 7681-7687 7 p. (Proceedings of the International Congress on Acoustics; vol. 2019-September).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Evaporation heat transfer characteristics of low GWP refrigerants in plate heat exchangers

    Kim, Y. & Lee, D. C., 2019, ICR 2019 - 25th IIR International Congress of Refrigeration. Minea, V. (ed.). International Institute of Refrigeration, p. 154-157 4 p. 1892. (Refrigeration Science and Technology; vol. 2019-August).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Fault Detection of PMSM under Non-Stationary Conditions Based on Wavelet Transformation Combined with Distance Approach

    Park, C. H., Lee, J., Ahn, G., Youn, M. & Youn, B. D., Aug 2019, Proceedings of the 2019 IEEE 12th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives, SDEMPED 2019. Institute of Electrical and Electronics Engineers Inc., p. 88-93 6 p. 8864842. (Proceedings of the 2019 IEEE 12th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives, SDEMPED 2019).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    16 Scopus citations

  • Inter-turn Short Circuit Fault Detection in Permanent Magnet Synchronous Motors Based on Reference Voltage

    Ahn, G., Lee, J., Park, C. H., Youn, M. & Youn, B. D., Aug 2019, Proceedings of the 2019 IEEE 12th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives, SDEMPED 2019. Institute of Electrical and Electronics Engineers Inc., p. 245-250 6 p. 8864924. (Proceedings of the 2019 IEEE 12th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives, SDEMPED 2019).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    12 Scopus citations
  • 2018

    Empirical mode decomposition for dynamic AFM microcantilevers in air and liquid environment

    Kim, I. K., Jang, J. W. & Lee, S. I., 2018, 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Path generation of industrial robot for tracking surface of workpiece using CAD-based off-line programming

    Chung, S. Y., Song, I. J. & Hwang, M. J., 7 Feb 2018, 2017 Asian Control Conference, ASCC 2017. Institute of Electrical and Electronics Engineers Inc., p. 345-346 2 p. (2017 Asian Control Conference, ASCC 2017; vol. 2018-January).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The effect of fin pitch on a cross-cut flow control in wavy fin heat exchangers

    Kim, G. W., Park, J., Karng, S. W., Oh, M. D. & Rhee, G. H., 2018, Proceedings of the 3rd Thermal and Fluid Engineering Summer Conference, TFESC 2018. Begell House Inc., p. 1503-1505 3 p. (Proceedings of the Thermal and Fluids Engineering Summer Conference; vol. 2018-March).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2017

    CFD simulation to evaluate the insulation performance of the copper conductive shield in a liquid hydrogen tank

    Moon, S. S., Park, J., Kim, G. W., Yoo, S. J. & Rhee, G. H., 2017, Proceedings of the 2nd Thermal and Fluid Engineering Summer Conference, TFESC 2017 and 4th International Workshop on Heat Transfer, IWHT 2017. Begell House Inc., p. 753-755 3 p. (Proceedings of the Thermal and Fluids Engineering Summer Conference; vol. 2017-April).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Design optimization of a refrigerant-cooling thermal management system for the battery in electric vehicles

    Park, S., Jang, D. S., Lee, D. C., Yang, W. & Kim, Y., 2017, Proceedings of the 3nd World Congress on Mechanical, Chemical, and Material Engineering, MCM 2017. Avestia Publishing, (Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access

  • Hybriding data-driven and model-based approaches for fault diagnosis of rail vehicle suspensions

    Park, C. H., Kim, S., Lee, J., Lee, D. K., Na, K., Song, J. & Youn, B. D., 2017, PHM 2017 - Proceedings of the Annual Conference of the Prognostics and Health Management Society 2017. Daigle, M. J. & Bregon, A. (eds.). Prognostics and Health Management Society, p. 612-620 9 p. (Proceedings of the Annual Conference of the Prognostics and Health Management Society, PHM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    3 Scopus citations

  • Poster abstract: OPC-UA communication framework for PLC-based industrial IoT applications

    Kim, W. & Sung, M., 18 Apr 2017, Proceedings - 2017 IEEE/ACM 2nd International Conference on Internet-of-Things Design and Implementation, IoTDI 2017 (part of CPS Week). Association for Computing Machinery, Inc, p. 327-328 2 p. (Proceedings - 2017 IEEE/ACM 2nd International Conference on Internet-of-Things Design and Implementation, IoTDI 2017 (part of CPS Week)).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    15 Scopus citations

  • Shadow space modeling for task planning of dual manipulators

    Yoon, H. J., Chung, S. Y. & Hwang, M. J., 25 Jul 2017, 2017 14th International Conference on Ubiquitous Robots and Ambient Intelligence, URAI 2017. Institute of Electrical and Electronics Engineers Inc., p. 749-750 2 p. 7992816. (2017 14th International Conference on Ubiquitous Robots and Ambient Intelligence, URAI 2017).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • The study on the effect of offset flow control in wavy fin heat exchanger

    Kim, G. W., You, S. J., Yeon, S. H. & Rhee, G. H., 2017, Proceedings of the 2nd Thermal and Fluid Engineering Summer Conference, TFESC 2017 and 4th International Workshop on Heat Transfer, IWHT 2017. Begell House Inc., p. 641-643 3 p. (Proceedings of the Thermal and Fluids Engineering Summer Conference; vol. 2017-April).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2016

    Failure precursor identification and degradation modeling for insulated gate bipolar transistors subjected to electrical stress

    Lee, J., Oh, H., Park, C. H., Youn, B. D., Kim, D. H., Kim, B. H. & Cho, Y. U., 2016, PHM 2016 - Proceedings of the Annual Conference of the Prognostics and Health Management Society. Daigle, M. J. & Bregon, A. (eds.). Prognostics and Health Management Society, p. 162-168 7 p. (Proceedings of the Annual Conference of the Prognostics and Health Management Society, PHM; vol. 2016-October).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Registration between robot and workpiece in virtual environment for off-line programming

    Hwang, M. J., Chung, S. Y., Lee, K., Song, I. J. & Son, H. I., 21 Dec 2016, Proceedings of the IECON 2016 - 42nd Annual Conference of the Industrial Electronics Society. IEEE Computer Society, p. 779-784 6 p. 7793685. (IECON Proceedings (Industrial Electronics Conference)).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations
  • 2015

    Effect of cross-cut on heat transfer performance and pressure drop in wavy fin

    Kim, G. W., Lim, H. M., Kim, S. Y. & Rhee, G. H., 2015, Proceedings of CHT-15: 6th International Symposium on Advances in Computational Heat Transfer, 2015. Begell House Inc., p. 486-488 3 p. (International Symposium on Advances in Computational Heat Transfer).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Formal modeling and verification for SDN firewall application using pACSR

    Kang, M., Choi, J. Y., Kwak, H. H., Kang, I., Shin, M. K. & Yi, J. H., 2015, Electronics, Communications and Networks IV - Proceedings of the 4th International Conference on Electronics, Communications and Networks, CECNet2014. Hussain, A. & Ivanovic, M. (eds.). CRC Press/Balkema, p. 155-161 7 p. (Electronics, Communications and Networks IV - Proceedings of the 4th International Conference on Electronics, Communications and Networks, CECNet2014).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • Machine-learning-integrated load scheduling for peak electricity reduction

    Sung, M. & Ko, Y., 23 Mar 2015, 2015 IEEE International Conference on Consumer Electronics, ICCE 2015. Institute of Electrical and Electronics Engineers Inc., p. 309-310 2 p. 7066425. (2015 IEEE International Conference on Consumer Electronics, ICCE 2015).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    4 Scopus citations

  • Proper orthogonal decomposition of tapping microcantilevers in liquid atomic force microscopy

    Kim, I. K. & Lee, S. I., 2015, 20th Design for Manufacturing and the Life Cycle Conference; 9th International Conference on Micro- and Nanosystems. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Scalable motion control system using EtherCAT-based shared variables

    Kim, W. & Sung, M., 19 Oct 2015, Proceedings of 2015 IEEE 20th Conference on Emerging Technologies and Factory Automation, ETFA 2015. Institute of Electrical and Electronics Engineers Inc., 7301614. (IEEE International Conference on Emerging Technologies and Factory Automation, ETFA; vol. 2015-October).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2013

    An open-source development environment for industrial automation with EtherCAT and PLCopen motion control

    Kim, I., Kim, T., Sung, M., Tisserant, E., Bessard, L. & Choi, C., 2013, Proceedings of 2013 IEEE 18th International Conference on Emerging Technologies and Factory Automation, ETFA 2013. 6648122. (IEEE International Conference on Emerging Technologies and Factory Automation, ETFA).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    17 Scopus citations

  • Nonlinear response of cnt cantilever based nano-resonators

    Kim, K. & Lee, S., 2013, 22nd Reliability, Stress Analysis, and Failure Prevention Conference; 25th Conference on Mechanical Vibration and Noise. American Society of Mechanical Engineers, (Proceedings of the ASME Design Engineering Technical Conference; vol. 8).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Transient analysis on nonlinear model of electrostatically actuated nanomechanical switch

    Kim, I. K., Han, D. H. & Lee, S. I., 2013, Technical Proceedings of the 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013. p. 177-180 4 p. (Technical Proceedings of the 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2012

    Evolution of linear moduli and nonlinear responses of a PZT wafer under electric field at room and high temperatures

    Lee, N., Ji, D. W., Kim, S. J. & Kim, Y. S., 2012, ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2012. p. 125-131 7 p. (ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2012; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The method to measure heart motion data of animal for medical robotic research

    Hwang, M. J., 2012, Future Information Technology, Application, and Service, FutureTech 2012. VOL. 1 ed. p. 621-626 6 p. (Lecture Notes in Electrical Engineering; vol. 164 LNEE, no. VOL. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Topology optimization of ultrasonic transducers for microsystem and IC packaging

    Kim, J. S., Kim, J. M., Lee, S. I. & Lim, E. J., 2012, Nanotechnology 2012: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - 2012 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2012. p. 79-82 4 p. (Technical Proceedings of the 2012 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2012).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2011

    An EtherCAT-based motor drive for high precision motion systems

    Sung, M., Kim, K., Jin, H. W. & Kim, T., 2011, Proceedings - INDIN 2011: 2011 9th IEEE International Conference on Industrial Informatics. p. 163-168 6 p. 6034856. (IEEE International Conference on Industrial Informatics (INDIN)).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    16 Scopus citations

  • Topology optimization on targeting frequency and mode of ultrasonic bonding tool for microchip packaging

    Ha, C. Y. & Lee, S. I., 2011, ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011. p. 179-184 6 p. (ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations
  • 2010

    Performanc enhancement in proton-exchange membrane fuel cell for cathode pulsating flow

    Kim, Y. H., Han, H. S., Kim, S. Y. & Rhee, G. H., 2010, ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology, FUELCELL 2010. p. 133-138 6 p. (ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology, FUELCELL 2010; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2009

    Design and implementation of a RIA framework for IPTV set-top boxes

    Sung, M. & Lim, H., 2009, Proceedings of the 4th International Conference on Ubiquitous Information Technologies and Applications, ICUT 2009. 5405716. (Proceedings of the 4th International Conference on Ubiquitous Information Technologies and Applications, ICUT 2009).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • Heat transfer correlations and pressure drop for cross-cut heat sinks using CFD: Technical notes

    Lee, S., Rhee, G. H. & Kim, S. Y., 2009, Computational Fluid Dynamics 2008. Springer Berlin Heidelberg, p. 811-812 2 p. (Computational Fluid Dynamics 2008).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Improving TCP goodput over wireless networks using kernel-level data compression

    Lee, M. Y., Jin, H. W., Kim, I. & Kim, T., 2009, 2009 Proceedings of 18th International Conference on Computer Communications and Networks, ICCCN 2009. 5235247. (Proceedings - International Conference on Computer Communications and Networks, ICCCN).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • Kinematic calibration of a parallel robot for small animal biopsies

    Hwang, M. J., Bebek, O., Liang, F., Fei, B. & Cavusoglu, M. C., 11 Dec 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2009. p. 4104-4109 6 p. 5353969. (2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2009).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    8 Scopus citations

  • Time-dependent strain responses of a poled PZT wafer under various constant magnitudes of longitudinal tensile stress

    Kim, S. J. & Lee, C. H., 2009, Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems 2009, SMASIS2009. p. 229-239 11 p. (Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems 2009, SMASIS2009; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2008

    A snooping rate adaptation algorithm for IEEE 802.11 WLANs

    Ha, J., Lee, K., Kim, H. & Kang, I., 2008, 3rd International Symposium on Wireless Pervasive Computing, ISWPC 2008, Proceedings. p. 606-609 4 p. 4556280. (3rd International Symposium on Wireless Pervasive Computing, ISWPC 2008, Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    5 Scopus citations

  • Design of a small animal biopsy robot

    Bebek, O., Hwang, M. J., Fei, B. & Cavusoglu, M. C., 2008, Proceedings of the 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS'08. IEEE Computer Society, p. 5601-5604 4 p. 4650484. (Proceedings of the 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS'08 - "Personalized Healthcare through Technology").

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    7 Scopus citations

  • Hop-by-hop frame aggregation for VoIP on multi-hop wireless networks

    Lee, K., Yun, S., Kang, I. & Kim, H., 2008, ICC 2008 - IEEE International Conference on Communications, Proceedings. p. 2454-2459 6 p. 4533502. (IEEE International Conference on Communications).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    13 Scopus citations

  • Secure vehicular communication for safety applications - A measurement study

    Juhong, M., Jihun, H., Sangki, Y., Inhye, K. & Hyogon, K., 2008, 2008 IEEE 67th Vehicular Technology Conference-Spring, VTC. p. 3016-3020 5 p. 4525879. (IEEE Vehicular Technology Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations
  • 2007

    Adaptive modeling of robotic assembly using augmented Petri nets

    Lee, D. Y., Chung, S. Y., Hwang, M. J. & Park, N. S., 2007, Proceedings of the 2007 American Control Conference, ACC. p. 3600-3605 6 p. 4282773. (Proceedings of the American Control Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    4 Scopus citations

  • Effect of blockage ratio on heat transfer enhancement in a channel by flow pulsation

    Ji, T. H., Hyun, J. M., Kim, S. Y. & Rhee, G. H., 2007, 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007. p. 137-142 6 p. (2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Motion planning based on multiple kinematic performance measures for bimanual robotic tasks

    Hwang, M. J., Park, N. S. & Lee, D. Y., 2007, ICCAS 2007 - International Conference on Control, Automation and Systems. p. 572-577 6 p. 4407089. (ICCAS 2007 - International Conference on Control, Automation and Systems).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Motion planning of bimanual robot for assembly

    Hwang, M. J., Lee, D. Y. & Chung, S. Y., 2007, 2007 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2007. p. 240-245 6 p. 4413792. (Conference Proceedings - IEEE International Conference on Systems, Man and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    8 Scopus citations

  • Nonlinear vibration analysis of ultrasonic horn model for flip-chip bonding

    Lee, S. I. & Hong, S. H., 2007, ICCAS 2007 - International Conference on Control, Automation and Systems. p. 2804-2807 4 p. 4406846. (ICCAS 2007 - International Conference on Control, Automation and Systems).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    3 Scopus citations

  • Optimal post-process of industrial solid freeform fabrication system

    Kwak, S. J., Hwang, M. J. & Lee, D. Y., 2007, ICCAS 2007 - International Conference on Control, Automation and Systems. p. 2578-2582 5 p. 4406801. (ICCAS 2007 - International Conference on Control, Automation and Systems).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2006

    A MAC parameter optimization scheme for IEEE 802.11e-based multimedia home networks

    Sung, M. & Yun, N., 2006, 2006 3rd IEEE Consumer Communications and Networking Conference, CCNC 2006. p. 390-394 5 p. 1593053. (2006 3rd IEEE Consumer Communications and Networking Conference, CCNC 2006; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    5 Scopus citations