TY - JOUR
T1 - Effect of shearing speed and UBMs on high speed shear properties of Sn 3.0Ag0.5Cu solder ball
AU - Jung, Do Hyun
AU - Lee, Wang Gu
AU - Jung, Jae Pil
PY - 2011/8
Y1 - 2011/8
N2 - The effect of high shear speed on shear force, shear energy and fracture surface was investigated for the solder joint of a Sn-3.0Ag- 0.5Cu ball. For both ENIG and OSP pads, the shear force increased with an increase in shearing speed to 0.3 m/s. However, for an ENEPIG pad, the shear force increased with an increase in shear speed to 0.6 m/s and kept almost constant afterward. The shear energy decreased with an increase in shearing speed for ENIG and OSP pads. For the ENEPIG pad, however, the shear energy almost remained constant in a shearing speed range 0.3-3.0 m/s. The fracture mode analysis revealed that the amount of brittle fracture for the ENIG and the OSP pads increased with shearing speed, and a complete brittle fracture appeared at 1.0 m/s for ENIG and 2.0 m/s for OSP. However, the ENEPIG pad showed only a ductile fracture until 0.25 m/s, and a full brittle fracture didn't occur up to 3.0 m/s. The fracture mode matched well with the shear energy. The results from the high speed shear test of SAC305 were similar to those of SAC105.
AB - The effect of high shear speed on shear force, shear energy and fracture surface was investigated for the solder joint of a Sn-3.0Ag- 0.5Cu ball. For both ENIG and OSP pads, the shear force increased with an increase in shearing speed to 0.3 m/s. However, for an ENEPIG pad, the shear force increased with an increase in shear speed to 0.6 m/s and kept almost constant afterward. The shear energy decreased with an increase in shearing speed for ENIG and OSP pads. For the ENEPIG pad, however, the shear energy almost remained constant in a shearing speed range 0.3-3.0 m/s. The fracture mode analysis revealed that the amount of brittle fracture for the ENIG and the OSP pads increased with shearing speed, and a complete brittle fracture appeared at 1.0 m/s for ENIG and 2.0 m/s for OSP. However, the ENEPIG pad showed only a ductile fracture until 0.25 m/s, and a full brittle fracture didn't occur up to 3.0 m/s. The fracture mode matched well with the shear energy. The results from the high speed shear test of SAC305 were similar to those of SAC105.
KW - Electrical/electronic materials
KW - High speed shear
KW - Mechanical properties
KW - Scanning electron microscopy (SEM)
KW - Soldering
UR - http://www.scopus.com/inward/record.url?scp=80052506384&partnerID=8YFLogxK
U2 - 10.3365/KJMM.2011.49.8.635
DO - 10.3365/KJMM.2011.49.8.635
M3 - Article
AN - SCOPUS:80052506384
SN - 1738-8228
VL - 49
SP - 635
EP - 641
JO - Journal of Korean Institute of Metals and Materials
JF - Journal of Korean Institute of Metals and Materials
IS - 8
ER -