Skip to main navigation Skip to search Skip to main content

Hydrogen production from catalytic gasification of waste wood–plastic composite using Ni-based catalysts supported on low-cost materials

  • University of Seoul

Research output: Contribution to journal › Article › peer-review

Abstract

In this study, the catalytic potential of low-cost materials (i.e. olivine, dolomite, and red mud (RM)) for H2-rich gas generation through the air gasification of wood–plastic composite (WPC) was investigated. Among the low-cost materials, the use of RM resulted in the maximum H2 selectivity (25.81 vol%) and gas yield (65.80 wt%). This is attributed to the effect of Fe2O3 content in RM, which induced the formation of oxygen vacancies, enhancing coking resistance, and stimulating water–gas shift reaction during the gasification process. Using RM, increasing the temperature from 700 to 800 °C enhanced the gas yield and H2 selectivity due to the promotion of endothermic dry- and steam-methane reforming reactions. Increasing the equivalence ratio in the range of 0.2 to 0.3 decreased the H2 selectivity while promoting the gas and CO2 production because of strengthened oxidation reactions which is undesirable for H2-rich gas production. Further, loading 10 wt% Ni and the addition of promoters increased the gas yield along with H2 and CO selectivities, in particular, 5 wt% Ca-10 wt% Ni/RM catalyst showed the highest gas yield (77.72 wt%), and H2 selectivity (37.49 vol%). This suggests that the combined effects of Ni and promoters enhanced the activity, selectivity, and stability of catalyst for H2 production. Overall, air gasification using promoted Ni-based catalysts supported on low-cost materials like RM as a catalyst can provide a new technology to convert WPC into a more useful and high-energy density substance such as H2-rich gas.

Original languageEnglish
JournalEnergy and Environment
DOIs
StateAccepted/In press - 2026

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • Air gasification
  • dolomite
  • hydrogen generation
  • olivine
  • red mud
  • wood-plastic composite

Fingerprint

Dive into the research topics of 'Hydrogen production from catalytic gasification of waste wood–plastic composite using Ni-based catalysts supported on low-cost materials'. Together they form a unique fingerprint.

Cite this